I haven’t posted in a long time, largely because I’ve been incredibly busy preparing for Aquafest 2009 in Laurel, MD. As president of GWAPA, one of the three clubs hosting the convention, there was plenty to do, but after a blur of a weekend, I think the convention was a success. Thanks to all of the sponsors, attendees, and volunteers who helped us pull it off! The main event that I was responsible for was the aquascaping challenge between Jason Baliban, our speaker, and Jeff Ucciardo, GWAPA’s vice president.

We spent the hour prior to the event sorting a mass of materials into two equal piles so that Jeff and Jason would start on a completely level playing field. Above is some of the manzanita wood that we got from Manzanita.com to use in the scapes. Jason got off to a quick start, putting in the white pool filter sand, developing a hardscape, and topping it off with some Aquasoil.

Jeff took a little bit of time to plan his scape, but was right behind Jason once he got his hardscape placed. Jason chose to extend the white sand all the way from front to back, while Jeff kept the sand confined to the foreground. Both competitors divided the tank into two mounds, one larger than the other.

In the end, both Jason and Jeff finished before the hour was up, which is quite impressive given the amount of time I usually spend working on an aquascape. Below is Jason’s finished scape from the side. The judges liked the rockwork in his scape, as well as the use of manzanita to provide flow to the layout.

However, the judges thought he could have filled in the scape with more plants than he did, but recognized that it should fill in nicely once it grows in. The tanks themselves are very nice, being a first look at Aquarium Design Group’s own line of rimless aquariums. They are 24″x16″x16″ and Catalina Aquarium donated a pair of HO-T5 lights to go with them.

Jeff’s finished aquascape is below, and as you can see, he did a very nice job filling in the scape with plants from the get-go. The judges took off points for his hardscape saying that it got lost in the plants.

They also wondered why he didn’t extend the white sand front to back between the two mounds. Ultimately, we ended up being able to exhibit two very nice scapes, especially considering that they were completed in an hours’ time frame. The judges gave a slight nod to Jason’s scape, but explained to the audience what they liked and disliked about each.

Also, during the whole hour, I gave a mini presentation about Aquascaping in general. We wanted to avoid folks from getting bored while the planting was going on, so I fielded a number of questions keeping the competitors from having to. Our A/V team also did a great job projecting the two tanks live onto two large screens so that everyone could see what was going on. Overall, the event was a success!

I finally got past my resistance and tore down the “Fallen Tree” aquascape in my 50G. I really wanted an aquascape where I can use some nice stem plants, but the manzanita hardscape seen below really just needs a simple low-to-the-ground type design on the right side. The stem plants I had in there looked okay, but didn’t really work with the hardscape.

So, Wednesday evening I tore out all of the plants and hardscape, and made myself a new rockscape using the new rocks I collected from my friend’s backyard. In his neighborhood, construction of the homes sometimes involves dynamite to dig out for the foundation, which conveniently leaves mounds of quartz-based rocks all over the place. I thought a rock-dominated aquascape would allow me to use the stem plants more effectively because the rocks would hide the bottoms, allowing nicely trimmed tops to pop out from behind them.

Above, you can see what I came up with. The foreground is still all Eleocharis sp. ‘Japan’, with a midground almost 100% comprised of Blyxa japonica. Blyxa aubertii is in the back-left with Limnophila repens var. ‘Mini’, Rotala sp. ‘Araguaia’, Ludwigia senegalensis, Pogostemon erectum, and Rotala mexicana var. ‘Araguaia’ making up the background. Comments welcome!

Back in July, I converted my quarantine tank into something of an aquascaped quarantine tank. Then, after rescaping my 75G, I had lots of extra Bolbitis, which I incorporated into this scape. This tank is really just a holding ground for plants and fish, with no CO2, minimal dosing, and a crappy light. Nevertheless, there’s no reason why it can’t look somewhat presentable.

20L - 9/12/2009, click for larger

Above is what it’s looking like currently (despite the poor picture). The Sagittaria subulata is slowly creeping to the right to fill in that side, and the crypts on the left side are gradually filling that in. The Bolbitis easily filled up the space in the back right, and behind the rock on the left. Overall, it’s coming along. There’s definitely an appeal to this low-tech tank because they grow so slowly that you only need to trim a couple times a year. Comments welcome!

This past weekend I was asked by a fellow GWAPA member to come over and help them take pictures of their 210G aquarium for the upcoming AGA Aquascaping Contest deadline on September 15th. I hadn’t actually seen Michael’s aquarium before, but I had heard some pretty amazing things about it. For starters, it’s a 210G custom-built aquarium using starfire glass, and fully plumbed into his home’s water-supply.

He has a constant drip trickling into the system, providing roughly a 10% water change every single day. This probably wouldn’t otherwise be required, but he really wants to keep his beautiful school of discus in pristine health. The plumbing is directly in the middle of tank, but he has aquascaped his tank, which is viewable by three sides, in such a way that all equipment is completely hidden.

The discus are phenomenal, being excellent stock from Discus Hans here in Baltimore. They did a pretty good job queuing up in a line while we were shooting the rest of the aquarium. If you’re wondering where the front-on aquarium shots are, I don’t want to post those until after the AGA contest is over.

It really is wonderful to be part of an aquarium club where you can learn so much stuff from the ways other folks have setup their tanks. Some day, I would love to have a large aquarium like this as the wall in-between two rooms, but that won’t happen anytime soon. It was a great opportunity to go over and see how Michael setup his magnificent aquarium. Thanks Michael!

This weekend, myself and another GWAPA member helped a third GWAPA member, Paul, rescape his 90G aquarium. Paul has been in the club for awhile, but wanted to make an earnest foray into the high-tech world of aquascaping. He has a nice T5 fixture on order, CO2 rigged up, and replaced his old gravel mixture with several bags of Eco-Complete.

It took us longer than you would think to place eight rocks in the aquarium. We added a rock, stood back and looked, gave directions to the person closest to the tank to move a rock a little to the right or left, and ultimately ended up with the rockscape you see above. You can see a little bit of crayon on the front of the glass because we drew a very minor sketch on the tank beforehand. The crayon wipes right off.

After setting our rockscape, we added another two bags of Eco-Complete to mound up on both sides. Then, we added in a few manzanita branches that Paul wanted to use in the scape. After doing this, we were ready to start scaping. We wanted to to keep a relatively simple plant arrangement for the time-being, so we used a number of lower-maintenance plants, with a couple stems thrown in.

We used Sagittaria subulata and a short Lilaeopsis species in the foreground, with Lobelia cardinalis and Crytocoryne wendtii in the midground, and on the right side background. There’s Echinodorus sp. ‘Vesuvius’ and Ludwigia inclinata var. verticillata ‘Cuba’ in the left background. Overall, I think we were all pretty happy with the scape. Obviously, it needs to do a lot of growing in, but it should fill out nicely. It’s definitely a lot of fun to aquascape with other people!