Two Rescapes

I finally blocked out about 12 hours this weekend to properly rescape my 33G rimless cube and my 50G aquariums. Both had become Blyxa farms, and could no longer be repaired without totally breaking them down. Therefore, I decided to try to put together two Nature Aquarium style aquascapes for our local club’s annual aquascaping contest.

33G - One Day after Rescape

For the 33G cube, I pretty much followed ADA’s formula for aquascaping: slope the substrate, place the hardscape, plant Anubias along the edges of the substrate, wrap moss around the the hardscape, plant everything else, and fill tank with water. What you can’t see are Hemianthus glomeratus, Didiplis diandre, and Ludwigia arcuata, which I hope will grow into nice bushes just over the top of the Malaysian driftwood.

50G - Immediately after rescape

The 50G uses Malaysian driftwood as well, but I couldn’t bring myself to throw away two full buckets for of Blyxa, so I decided to reuse them in this scape. Unfortunately, I haven’t received the Ranalisma rostrata in the mail yet, but that will be my foreground plant here. I took photos during my rescape process, so let’s go through it.

I always try to do some preliminary hardscaping outside of the tank before I start. This allows me to quickly realize if I have enough hardscape materials, the right pieces, and pre-plan what types of plants I’ll need to pull from other tanks.

This substrate was previously ADA Aquasoil Amazonia on top of a mixture of 50/50 sand and worm castings with 100% pool sand in the foreground. I scrapped out all of the sand foreground, and while I was at it, decided to remove the top layer of Aquasoil, as well.

I recapped the base level with fresh ADA Aquasoil to help get my aquascape off to a fresh start. All of the muck that was removed is going outside to my pond for this year’s potted pond plants.

Next, it was time to place the hardscape. Since I had previously designed the hardscape outside of the aquarium, I simply transplanted the driftwood from my floor to the tank. I still spent about 20 minutes adjusting the angles and placement of the pieces. I finished the process by working in a little bit of extra Aquasoil throughout the hardscape to better integrate the wood into the landscape.

Next, I planted the aquascape. The midground is mostly made up of Blyxa japonica, with a background of Blyxa aubertii on the left hand side. I also added several stems from my farm tank, namely: Hygrophila pinnatifida, Rotala macrandra ‘narrow’, Syngonanthus sp. ‘Madiera’, Didiplis diandre, and  Hygrophila odora. Finally, I softened the hardscape with Fissidens moss.

It’s hard to see the difference in this picture, compared to the one above it, but I added a few moss-wrapped pieces of wood around the perimeter of the foreground. I like adding these little touches to make the environment a little bit more natural looking.

Lastly, I filled the tank with water. I will post updates as the water clears, and after I plant the foreground. Initial feedback welcome!